NK-6171
Embedded Industrial Motherboard
- Supports Intel® CoreTM 10th/11th generation i9/i7/i5/i3 6th/7th/8th generation i7/i5/i3/Pentium/Celeron high performance processors,Max. TDP 65W
- 2 x Intel GbE LAN controller
- 2 x Intel GbE PoE LAN controller 4 x USB3.0, USB2.0 Type A on board for dongle
- 2 x RS232/RS485, RS485 support auto flow control
- Supports both DVI-D and HDMI display port
- 1 x miniPCIE expansion slot,Support Wifi,3G/4G modules
- 32 x isolated DIO(16 x DI, 16 x DO)
- DC12~24V Power supply with overcurrent, overvoltage and polarity inverse protection
- Supports wall-mounted or DIN-Rail fixing style
- Wide operating temperature -20 ~ 60°C supported
Embedded Industrial Motherboard Product Information
| Processor | |
|---|---|
| CPU | Intel® Celeron® J6412 processor (2.0GHz up to 2.6GHz) TDP 10W |
| Chipset | Intel® SoC integrated |
| Memory Architecture | Single Channel(Non-ECC) DDR4 3200MHz up to 32GB |
| Memory Capacity | 1 x DDR4 260-pin SO-DIMM slot |
| Storage Medium | 1 x SATA3.0 port, 1 x M.2-2242 B Key SSD slot(SATA3.0) |
| BIOS | AMI 256Mb UEFI BIOS |
| Graphic | |
| Controller | Intel® UHD graphics integrated |
| Audio | |
| Codec | Realtek ALC897 codec |
| Rear I/O | |
| Display | 1 x DP1.4 up to 4096x2160@60Hz, 1 x HDMI up to 4096 x 2160@30Hz |
| Ethernet | 2 x GbE (RJ45) Realtek 8111H controller |
| USB | 2 x USB3.0 (5Gbps), 2 x USB2.0 (480Mbps) |
| Button | 1 x Power Button |
| Indicators | 1 x SATA LED (Red), 1 x Power LED (Green) |
| Internal I/O | |
| Display | 1 x LVDS dual channel 18/24bit up to 1920x1200@60Hz, 1 x eDP1.3 up to 4096x2160@60Hz |
| Audio | 1 x Audio wafer (Mic-in/Line-out 2*5pin) |
| USB | 2 x USB2.0 wafer |
| COM | 1 x RS232/RS485 wafer, 1 x RS232 wafer, 4 x TTL wafer |
| Fan | 1 x Smart Fan wafer |
| SMbus | 1 x SMbus wafer |
| eSPI | 1 x Front panel wafer |
| GPIO | 1 x 8bit GPIO |
| Others | 1 x Front panel wafer |
| Physical | |
| Dimensions | (L)146mm x (W)102mm |
| Weight | 0.8kg |
| Operating System | |
| Microsoft Windows | Windows 7/10 |
| Linux | Linux |
| Power | |
| Power Dissipation | 16.3W (Idle mode), 17.5W (Typical mode) |
| Type | 12~24V DC input, +/-10% tolerance |
| Environment | |
| Work Temperature | -10℃ ~60℃ with SSD |
| Storage Temperature | -40℃ ~85℃ |
| Relative Humidity | 5~95% (Non-condensing) |
| Vibration | 5~500Hz, 3Grms operating |
| Other | |
| WatchDog | System reset programmable from 1~255 seconds |
| Expansion Slot | |
| M.2 | 1 x M.2-2230 E key slot for wifi module (PCIe/USB2.0) |
| MiniPCIe | 1 x Mini-PCIe slot with Nano-SIM socket (PCIe/USB2.0) |
Click below to download the datasheet
| Model | Description |
|---|---|
| NK-6171 | 3.5", Elkhart Lake, J6412, DDR4 SO-DIMM, M.2-2242 (SATA3.0), Standard, compose, 2*COM Cable, 1*SATA Cable, w/ALC897w/210AT |
| Product Code | Quantity | Description |
|---|---|---|
| KF0.001046.00.L54 | 2 | COM Cable 2*5 pin wafer to DB9 cable, length=150mm |
| KF0.001049.00.L54 | 1 | SATA Cable, signal and power cable |
| JF7.000041.00.D03 | 1 | 2-pin terminal block, pitch 5.08mm |
| Product Code | Description |
|---|---|
| L45.000016.00.T40 | Heatsink for NK-6171 |
| C3Z.NKEB01.10.NDJ | AEB-4COM00, 2 x RS485/422/232(DB9), 2 x RS232 wafer I/O expansion kit |
| C3Z.0001.00.NDJ | CM-060W-CWT0, 12V/60W adapter, 180cm power cord |
| C3Z.0002.00.NDJ | CM-090W-HKA, 12V/84W adapter, 180cm power cord |
| KF0.001047.00.L54 | USB cable, 1*4 pin wafer to USB2.0 type-A cable, length=150mm |
| KF0.001048.00.L54 | USB cable, 2 x USB2.0 type-A Y cable with bracket, length=150mm |
| KF0.000949.00.Y09 | Audio Cable, 2*5 pin wafer to Mic-in/Line-out cable, length=300mm |
