X

Contact Info

  • Nodka Europe Luchthavenweg 81 Room 038 5657 EA Eindhoven The Netherlands Email: [email protected]
  • Nodka Europe Luchthavenweg 81 Room 038 5657 EA Eindhoven The Netherlands Email: [email protected]

NK-6172

Embedded Industrial Motherboard
  • Intel® Celeron® J1900 processor, Quad-core, base frequency 2.0GHz,TDP 10W
  • Supports 1x DDR3L-1333MHz SO-DIMM slot, up to 8GB
  • Supports VGA, HDMI, LVDS/eDP Dual-display
  • 2 x Giga-bit Ethernet
  • 1 x USB3.0 port, 5 USB2.0 ports
  • 1 x RS232/485, 1 x RS232, 4 x TTL
  • 1 x M.2-2242,1 x Mini-PCIe slot with nano-SIM card socket
  • 12~24V power input, lockable DC-IN phoenix terminal block

Embedded Industrial Motherboard Product Information

Processor
CPUIntel® Celeron® J6412 processor (2.0GHz up to 2.6GHz) TDP 10W
ChipsetIntel® SoC integrated
Memory ArchitectureSingle Channel(Non-ECC) DDR4 3200MHz up to 32GB
Memory Capacity2 x DDR4 260-pin SO-DIMM slot
Storage Medium1 x SATA3.0 port, 1 x M.2-2242 B Key SSD slot(SATA3.0)
BIOSAMI 128Mb UEFI BIOS
Graphic
ControllerIntel® UHD graphics integrated
Audio
CodecRealtek ALC897 codec
Rear I/O
Display1 x DP1.4 up to 4096x2160@60Hz, 1 x HDMI up to 4096x2160@30Hz
Ethernet4 x GbE (RJ45) Realtek 8111H controller
USB2 x USB3.0 (5Gbps), 2 x USB2.0 (480Mbps)
Button1 x Power Button (White for power on, Blink for sleep mode, Off for power off)
Indicators1 x SATA LED (Red), 1 x Power LED (Green)
Internal I/O
Display1 x LVDS dual channel 18/24bit up to 1920x1200@60Hz, 1 x eDP1.3 up to 4096x2160@60Hz (shares connector with LVDS)
Audio1 x Audio wafer (Mic-in/Line-out 2*5pin)
USB2 x USB2.0 wafer (1*4pin)
COM1 x RS232/RS485 wafer (2*5pin), 1 x RS232 wafer (2*5pin), 4 x TTL wafer (2*8pin)
Fan1 x Smart Fan wafer (1*4pin)
SMbus1 x SMbus wafer (1*4pin)
LPC1 x LPC header for debug
eSPI1 x Front panel wafer (2*5pin) (Power LED, HDD LED, Power button, Reset button)
GPIO1 x 8bit GPIO (2*5pin)
Others1 x Front panel wafer (2*5pin) (Power LED, HDD LED, Power button, Reset button)
Physical
Dimensions(L)146mm x (W)102mm
Weight0.8kg
Operating System
Microsoft WindowsWindows 7/10
LinuxLinux
Power
Power Dissipation16.3W (Idle mode), 17.5W (Typical mode)
Type12~24V DC input, +/-10% tolerance
Environment
Work Temperature-10℃ ~60℃ with SSD
Storage Temperature-40℃ ~85℃
Relative Humidity5~95% (Non-condensing)
Vibration5~500Hz, 3Grms operating
Other
WatchDogSystem reset programmable from 1~255 seconds
Expansion Slot
M.21 x M.2-3042 B Key slot with Nano-SIM socket for 5G module (USB3.0 Signal, shares connector with M.2-2242)
MiniPCIe1 x Mini-PCIe slot with Nano-SIM socket (PCIe/USB2.0)

Click below to download the datasheet

NK-6172 Datasheet

Model Description
NK-6172 3.5", Elkhart Lake, J6412, 2*DDR4 SO-DIMM, M.2-2242 (SATA3.0), Standard, compose, 2*COM Cable, 1*SATA Cable, w/ALC897w/210AT
Product Code Quantity Description
KF0.001046.00.L54 2 COM Cable 2*5 pin wafer to DB9 cable, length=150mm
KF0.001049.00.L54 1 SATA Cable, signal and power cable
JF7.000041.00.D03 1 2-pin terminal block, pitch 5.08mm
Product Code Description
C2Z.617201.0A.NDJ Heatsink for NK-6172
C3Z.NKEB01.10.NDJ AEB-4COM00, 2 x RS485/422/232 (DB9), 2 x RS232 wafer I/O expansion kit
C3Z.0001.00.NDJ CM-060W-CWT0, 12V/60W adapter, 180cm power cord
C3Z.0002.00.NDJ CM-090W-HKA, 12V/84W adapter, 180cm power cord
KF0.001047.00.L54 USB cable, 1*4 pin wafer to USB2.0 type-A cable, length=150mm
KF0.001048.00.L54 USB cable, 2 x USB2.0 type-A Y cable with bracket, length=150mm
KF0.000949.00.Y09 Audio Cable, 2*5 pin wafer to Mic-in/Line-out cable, length=300mm

Explore product variants and custom options based on the Industrial 3.5inch SBC NK-6XXX Series

Related Products